BSR Mode (BSR Command) is only applicable for Port C. In this Mode the individual bits of Port C can be set or reset. This is very useful as it. The BSR mode is a port C bit set/reset mode. The individual bit of port C can be set or reset by writing control word in the control register. The control word format . Control Word and BSR Mode Format. Page 2. The figure shows the control word format in the input/output mode. This mode is Filectrlformat
|Published (Last):||8 July 2014|
|PDF File Size:||19.5 Mb|
|ePub File Size:||8.94 Mb|
|Price:||Free* [*Free Regsitration Required]|
Mode 0 and Mode 1 are provided. The BSR mode affects only one bit of port C at a time.
What are the basic modes of operation of , Explain with the format of control register.
There are three basic aspect of storage management: This is an active low input signal for This is required because the data only stays on the bus for one cycle. From Wikipedia, the free encyclopedia. The ‘s outputs are latched to hold the last data written to them.
So to set any bit of Port C, bit pattern is loaded in control register. When is reset, it will clear control word register contents and all the ports are set to input mode. In our lab, when I had not not set port C as output and directly used BSR mode to set and reset individual bits, only the 4 led’s connected to the lower four bits of port C were responding.
It is an act of managing computer memory.
Engineering in your pocket Download our mobile app and study on-the-go. Microprocessor And Its Applications. Sign up or log in Sign up using Google. Retrieved 3 June modd Explain the following with examples: When I set port C as output, the desired output was obtained. Working of in mode 2: Ranjith 1 5.
All the 3 modes i. Subprogram Sequence Control in Programming language. All of these chips were originally available in a pin DIL package. In this mode group A is used as input and output i. Sign up using Facebook. The read operation is not allowed ln control register.
Explain BSR mode of with application.
The Mode 2 is combination of Mode 1 input output both at a time to port A. Since the two halves of port C are independent, they mmode be used such that one-half is initialized as an input port while the other half is initialized as an output port. This page was last edited on 23 Septemberat Implicit and Explicit Sequence Control: The functionality of the is now mostly embedded in larger VLSI processing chips as a sub-function. How object oriented programming language concepts are better than structured prog The Intel or i Programmable Peripheral Interface PPI chip was developed and manufactured by Intel in ln first half of the s for the Intel microprocessor.
Post as a guest Name. The mode used eight bits of Port C only.
If from the previous operation, port A is initialized as an output port and more is not reset before using the current configuration, then there is a possibility of damage of either the input device connected or or both, since both and the device connected will be sending out data. Storage Management in Programming Language.