Arteche manufactures trip and lockout relays with a wide range of options to met each application requirements. Reliability an performance by default for. Installed in more than countries, Arteche relays are the best choice for applications such as trip high and medium voltage breakers, safety critical logics in. Instantaneous relays contacts change instantaneously from non-working position to working position when its coil is energized, coming back contacts to the.
|Published (Last):||8 June 2014|
|PDF File Size:||10.95 Mb|
|ePub File Size:||18.78 Mb|
|Price:||Free* [*Free Regsitration Required]|
Auxiliary supply circuit supervision relays Auxiliary relay with four changeover contacts, aimed to supervise the failure of trip supply.
Faults will occur when the trip voltage is lost, so the relay drops off in those cases, providing the related signs and alarms. The contacts return to the rest position when the coil is no longer energized. Trip relays Instantaneous trip relays, whose contacts change instantaneously from the rest position to the working position when the coil is energized. The correct state of the circuit is showed with a artech LED on the front plate of the relay.
Instantaneous trip relays, relys contacts change instantaneously from the rest position to the working position when the coil is energized.
Latching Relays: Arteche – InnoTrans – Product
Trip circuit supervision relays For single phase or three phase circuit breakers. Trip relays with 2 stable positions for the output contacts.
Through a small supervision current the whole circuit is arteeche, in both positions of the circuit breaker opened or closed. It uses reference signal from GPS Global Positioning System and features wide variety of outputs and time coding standards. This range includes relay with 4 and 8 contacts, with operating times below 8 ms or 10 ms, depending on the model, and possibility of manual reset.
Auxiliary relay with four changeover contacts, aimed to supervise the failure of trip supply. For single phase or three phase circuit breakers.
Connecting the relay across the trip circuit supply, the equipment is normally energized. In order to avoid faulty alarms due to instantaneous supply voltage dips, the drop off time of the relay is delayed over ms so those non-permanent failures of trip supply would not be argeche.
KRIMP & WEDGE, INC. – ARTECHE, Spain
The output contacts change its position if the relay detects a failure in the continuity of the circuit. This range includes relays with 2, 4 and 8 contacts, with operating times from 3 ms to 8 ms, depending on the model.
Depending on which coil is energized, the contacts will change from one position to the other. Trip and lockout relays Trip relays with 2 stable positions for the output contacts.